News

21 August 2018

New Products: We have continued to expand the product range of our hexagon carbon steel composite panel fixings and we now carry in stock sizes up to 300mm long for fasting into cold rolled purlins and rails. These additions meet the market demand for thicker composite panels in refurbishment and new build applications.
Click here for details

30 April 2018

We have added a new item to our stainless steel bi-metal low profile range. The new fixing will fix composite panels from 100mm to 150mm maximum panel thickness into cold rolled purlins and rails. It can be assembled with various sizes of stainless bonded sealing washers and the fixing can also be powder coated to most RAL and BS colours. Click here to view.

28 February 2018

We have extended our range of A4 (316 grade) bi metal masonry anchors to include an additional length. The 57mm version meets growing demand from our existing customer base.

18 January 2018

We have extended our range of bonded washers to include a stainless steel 29mm o/d to suit a 12mm diameter bolt this complements the existing range and provides a solution where a 12mm diameter bolt is used in conjunction with the bonded washer to provide a water tight seal.

4 October 2017

We have 2 new products to add to our range of countersunk bi metal stainless steel self drilling screws. The 38 and 50mm long fasteners will complement our very popular countersunk stainless fasteners and offer our customers increased and more varied application solutions. We now have one of the most extensive stainless steel self drilling fastener product ranges in the UK market. Further expansion and new products will be added over the next 6 months.

22 August 2017

We now offer a 50mm o/d A2 stainless bonded washer with 3mm grey epdm. We have two versions one to suit a 5.5 or 6.3mm diameter screw and one that can be used in conjunction with our stainless or carbon megastitchers which are ideally suited for fixing flashings and sheets where the original screw has been removed. Using a standard 5.5mm or 6.3mm diameter screw in the existing holes may result in cross threading or significantly reduced pull out which can result in a roof or fixing failure. The 50mm bonded washers are useful for covering up oversized or multiple holes resulting from a missed fixing or damaged holes.

11 July 2017

We have extended our range of A4 (316 grade) bi metal masonry anchors to include a 100mm version which will allow for increasing insulation increases.

View items here

4 July 2016

2 new products to complement our range of hexagon head carbon steel masonry anchor range, in 175mm and 200mm long. You can view the items here.

29 June 2016

A4 (316 Grade) bi metal self drilling screws now available!  Architects and techinicians are often specifiying higher grades of stainless steel fasteners for extended warranty and marine enviroments this new product range responds to our customers and the wider market. View item here.

18 May 2016

We now have a new product that responds to the market requirements for single skin sheet to timber applications where an extended service life is required. Our austenitic 304 grade bimetal fasteners are available in 2 sizes 6.3 x 50 and 75mm long and provide a 25 year life expectancy and can be offered with an injection moulded coloured head or powder coated to the required RAL or BS number. View item here.

11 May 2016

Our composite panel fasteners for both cold and hot rolled steel are now available in lengths of up to 300mm long. These products are manufactured from 304 grade austenitic steel and respond to the need for longer fasteners for  increased core thicknesses of modern composite panel systems.
Stainless Steel Screws for Composite Panel to Hot Rolled Purlins
Stainless Carbon Steel Screws for Composite Panel to Cold Rolled Purlins

26 June 2015

We have extended our range of carbon steel composite panel fasteners for hot and cold rolled purlins and we now offer products up to 250mm long. 

17 March 2015

We have added a longer length 6.3 x 150mm to our hexagon head carbon steel masonry anchor range which you can see here. 

15 December 2014

New product – as part of continuing product expansion we now have in stock a Bi Metal Stainless self drilling screw for fibre cement to cold rolled steel – details here.

1 August 2014

In February this year Powell Gee purchased a second warehouse facility in Wolverhampton. The 9000 sq ft building will help us continue our expansion in the UK roofing and cladding market. The company will still be based in Wednsbury and the new warehouse will be used as an overspill  warehouse to accommodate additional fast moving items and to maintain our focus on diverse and specialist self-drilling screws.

2 May 2014

We now offer a stainless steel bi metal self drilling screw for fibre cement sheet to cold rolled purlins. See the product by clicking here.

7 February 2014

We have extended our range of countersunk self drilling screws in carbon steel. These new products will enable us to offer solutions for thicker composite panels and the range includes fasteners for cold and hot rolled purlins up to 200mm long.

12 January 2014

We now keep part made hook bolts in M8 and we are able to produce different lengths within 24-48hrs depending on the size and quantity required.
Please call us for prices and availability

9 December 2013

We have added 2 new items to our concrete anchor range.
A 6.3 X 45mm and 6.3 X 75mm LONG IN 316 STAINLESS STEEL. These products are for use with aluminium flashings to block or brickwork where extended lifespan are specified or for use in a marine environment. Please contact us for details.

23 September 2013

Midwest Snips® are now available from stock – a high quality product from America with “forged blade technology” probably the best snips available on the market!